Screen Kit Prices

How the Magnolia System Works

Component Prices

Real Value

This extrusion makes re screening your existing
enclosure attractive and speedy. It gives you all the
advantages of the MagnoliaScreen System. It
measures 1/4” x 3/4”. It is available only through
Magnolia Outdoor Living.

Available in white or bronze; $1.20/ lineal ft.

This is a 2” x 2” extrusion. It is a rigid structural piece
that is used for support in a free standing screen enclosure.

Available in various colors; $3.36/ lineal ft.

This is a 1” x 2” extrusion. Typically it is attached to
the floor, or to an existing wall from which the
enclosure is built. The 2” x 2” extrusions are attached
to it.

Available in various colors; $1.95/ lineal ft

This is a 1/2” x 1” extrusion. This extrusion holds the
screen in spots where there is no need for structural
support, nor enough room for larger extrusions.

Available in White or Bronze; $1.75/ lineal

This is the flat vinyl spline used to hold screens in
place in the Magnolia Screen System. The spline is
pressed into the groove in the upper right corners of
the frames with the screen between the spline and the
bottom of the groove.

$.08/ lineal ft.

The screen doors are 36" wide and are shipped
with all the needed hardware. They can be fitted
for right and left swing.

Available in White, Bronze, Ivory,
Sand or Adobe

$80.00

A pet door is more convenient for everyone!
This is a high quality aluminum frame.

Available in white only:

$ 42.00
$ 64.00
$140.00

Polyester/Vinyl Screen:

17 x 20 Fine Mesh          $1.07 / SF

16 x 14 Standard Mesh    $.83 / SF

Pet Screen:                     $1.36 / SF

Solar Screen 80%            $1.26 / SF

Solar Screen 90%            $1.68 / SF

Fiberglass Screen:

20 x 20 Mesh       $.77 / SF

18 x 14 Mesh       $.44 SF

18 x 16 Mesh       $.39 / SF
                                    
Florida Glass:       $1.48 / SF